Description

The Apollolift manual pallet jack typically comprise a vertical metal frame and two forks that can support a pallet of goods and that can be raised or lowered to an optimal, ergonomic height for loading or unloading. The forks may be controlled with a hand crank or a foot pump, and they can sometimes be inverted to adjust the service range. Wheels allow the material lift to be rolled for moving materials. Some material lifts have special wheels on the frame that can enable it to be loaded into a delivery truck for transport. Material lifts can be used in warehouses, storerooms, shipping facilities, and other industrial environments. This telescoping manual hydraulic pallet jack is suitable for lifting and transporting pallets in industrial and commercial settings.

Dimension:
Lowered height: 3″; Raised height: 7.3″
Polyurethane steering wheels: 7″
Polyurethane fork wheels: 3″
Overall length: 63.5″
Single fork width: 6.3″
Fork thickness: 2″
Distance Between Forks (Inside): 14.4″
Load capacity: 5,500lbs

TEMPERATURE:
Hydraulic fluid may not function properly below minus 13° F

  • 3 position hand control-Raise, Lower, Neutral
  • Entry/exit roller, more freely travel
  • Frame force is more reasonable, and the strength is more reliable
  • Yellow manual pallet jack forks lowering speed is controllable, with overload valve to avoid overloading
  • Rubber wrapped handle
  • PU wheels. Non-marking, low noise wheels
  • Integrated cast pump makes no leakage
  • Product Weight: 180 lb