Description

  • 【24V 20A Fully Automatic Smart Charger】Forklift battery charger 24V is a fully automatic fast charger with charging current up to 20A and working efficiency up to 90%. 24V charger is suitable for 24V vehicles with 100AH-200AH lead-acid batteries, such as electric pallet jack, forklift, stacker, scissor lift platform, golf cart, floor scrubber, etc. Our 24volt forklift battery charger can be used with a 24V battery composed of 2* 12V batteries or 4* 6V batteries.
  • 【3-Color Status Indicator】24V pallet jack battery charger comes with a 3-color indicator light, allowing you to easily monitor the battery charging status. 1.Red/Green Light Flash: Standby/No-load Mode; 2. Red Light Fast Flash: Precharging (0~20%); 3. Red Light Flash: Constant Current Charging (20%~80%); 4. Yellow Light Flash: Constant Voltage Charging (80%~99%); 5. Green Light Flash: Trickle Charging (≈100%); 6. Green Light On: Fully charged (100%).
  • 【Trickle Charging & Battery Repair】This forklift charger adopts advanced microcontroller 5-stage smart charging technology. It can automatically adjusts the current and voltage and controls the charging time to protect the battery from overcharging. When the battery is about to be fully charged, it will enter trickle charging mode to help extend battery service life. 24V forklift battery charger also can repair batteries with vul.canized plates. Long-term charging will not damage the battery.
  • 【IP67 Waterproof & Fast Heat Dissipation】24 volt charger case features a one-piece sealed die-cast aluminum construction with IP67 waterproof rating. You don’t have to worry about the charger being damaged by water, dust or vibration, making it perfect for outdoor use. The pallet jack charger has a built-in cooling fan and is designed with eddy currents around it, which greatly improves the cooling efficiency and enables it to work stably.
  • 【8 Protection Functions】Forklift charger has perfect protection systems: No-load/Overvoltage/Overcurrent/Overheating/Overcharge/Short-circuit/Reverse Polarity/Timing Charging Protection. When the output voltage, output current and temp. exceed the set standards, it will auto reduce charging current. When 24V charger is short-circuited, reverse-connected or unloaded, it will auto stop working to protect charger and battery from damage.When the fault is repaired, it will automatically resume work.
  • 【16FT Long Cable & Lightweight】The 24v forklift battery charger comes with a 16FT extra long cable (10ft input cable + 6ft output cable), providing great flexibility without the need for additional extension cords. Electric pallet jack battery charger is compact and weighs only 5 lbs. It is also designed with a handle for you to carry it anywhere.
  • 【Timed Charging Protection & FCC/ETL Certification】Our 24V charger has an timeout protection setting. If it works continuously for 15 hours, it will automatically stop working to protect the battery from being damaged due to overcharging, you can rest assured to charge battery for a long time. It is FCC and ETL certified, providing you with safer charging, lower energy consumption, higher conversion efficiency, better load capacity, less electromagnetic radiation interference and noise.
  • 【3 Years Warranty】We KAISAL aim at trying our best to offer you the best product and services to make you unworried before/after the purchase. Our floor scrubber battery charger all pass 100% full load aging test. We promise a 3-year warranty. For quality problems caused by non-human damage, please feel free to contact us. We will provide free replacement after confirmation.
  • 【Wide Compatibility】Our 24V charger comes with a spare plug and two terminal pins for wide compatibility with 24V vehicles. You don’t need to worry about plug adaptation. Even if your vehicle’s charging plug does not fit the charger’s plug connector, you can replace the charging plug connector on your vehicle with the spare plug connector provided (Easy to operate, just connect the battery cable to the spare plug connector), and then plug it into the charger’s Anderson connector.

Product Description

TECHNICAL PARAMETERS:

Input Voltage: AC 100V-240V; Input Frequency: 50Hz-60HZ; Input Current: ≤10A; Output: 24V 20A

Work Efficiency: ≥92%; Power Factor: ≥0.98; Noise: ≤45dB

Working Temperature: -20℃~+45℃; Storage Temperature: -40℃~+90℃; Relative Humidity: 5%~95%

Timing Charging Protection

Our charger has timeout protection settings. If it works continuously for 15 hours, it will stop working automatically to prevent the battery from being damaged due to overcharging.

Fast Heat Dissipation

The cooling fan runs continuously while charging, effectively cool the charger, make it work stably and ensure a longer service life.